Tuesday, March 26, 2013

Supco TA22 Single Set Point Temperature Alarm with Digital Display, -40 to 160 Degrees F, 120 VAC

Supco TA22
Supco TA22 Single Set Point Temperature Alarm with Digital Display, -40 to 160 Degrees F, 120 VAC
by Supco
5.0 out of 5 stars(1)

New!: $107.10 $87.30 (as of 03/26/2013 20:32 PST)

Temperature Sensors

The TA22 Temperature Alarm is a single point or threshold type of temperature alarm. This type of temperature alarm monitors the temperature at the sensor probe tip and when this temperature passes above (or below) the set point, the unit will execute a preset operation. The unit's display shows the current temperature, the alarm set point temperature, the alarm state, and the mode of operation of the unit (over temperature or under temperature alarm). The easy to read display features Current Temperate, Alarm Status, Over/ Under mode indicator, Alarm Set Point and Temperature Units ( degree F or degree C). Adjustable range from -40 degree F to +160 degree F (-40 degree C to +71 degree C). AC Adapter included. 80 db Audible alarm. Built-in terminals for remote alarm or telephone dialer connection. Alarm switch for 'No delay' or '1 hour delay'. Applications: food markets, convenience stores, supermarkets, restaurants, florists, greenhouses, laboratories, pharmaceutical storage facilities, refrigerated transport, cold storage facilities, computer. 1 Alarm channel. Precision thermistor with 6' cord. Thermistor type sensor. +2 degree F (+/- 1 degree C) Temperature accuracy (display). Screw type, 120 VAC, 5 amp maximum remote alarm connections. 120 VAC power. Hi-impact thermoplastic case. Surface, external holes provided mounting. Measures 3-3/32" length by 1-1/2" width by 4-57/64" height, 1 year warranty.

  • Rank: #4886 in BISS
  • Brand: Supco
  • Model: TA22
  • Number of items: 1
  • Dimensions: .81 pounds
  • Adjustable alarm temperature ranges
  • Audible and visual alarm
  • Built-in terminals for remote alarm or telephone dialer connection, alarm switch for 'No delay' or '1 hour delay'
  • Used in food markets, convenience stores, supermarkets, restaurants, florists, greenhouses, laboratories, pharmaceutical storage facilities, refrigerated transport, cold storage facilities, computer
  • Measures 3-3/32" length by 1-1/2" width by 4-57/64" height; 1 year warranty

Amprobe 34XR-A Prof DMM True RMS with Temperature & Backlight

Amprobe 34XRA
Amprobe 34XR-A Prof DMM True RMS with Temperature & Backlight
by Amprobe
4.5 out of 5 stars(2)

New!: $122.95 $106.46 (as of 03/26/2013 20:32 PST)
5 Used! | New! from $101.36 (as of 03/26/2013 20:32 PST)

Temperature Sensors

The Amprobe 34XR-A digital multimeter with included temperature probe is a true RMS (root mean square) sensing, auto- or manual-ranging meter for measuring current, voltage, resistance, capacitance, frequency, and duty cycles in electrical testing and maintenance applications. The meter comes with a set of detachable test leads and two alligator clips for measuring alternating current (AC) and direct current (DC) to 10 amp, AC voltage to 750 volts (V), DC voltage to 1,000V, resistance to 40 megaohms, capacitance to 4,000 microfarads, frequency to 1 megahertz (MHz), and duty cycles to 90%. The meter comes with a K-type thermocouple probe and adaptor plug for measuring temperature. The 4,000 microfarad capacitance rating is for testing run/start capacitors on motors. A liquid crystal display (LCD) shows readings both in digits and on a 41-segment bar graph. The display is backlit for visibility in low light. The maximum or minimum reading mode displays the highest or lowest reading in a session to track a sudden increase or decrease in readings. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether the circuit's diodes work properly. The hold function keeps a reading on the display, even after the meter is disconnected. An auto power-off mode turns off the unit after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced.

This true RMS (root mean square) sensing meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has a sinusoidal waveform, or non-linear loads, such as electronic devices or motors, where the current or voltage has a sinusoidal non-sinusoidal waveform. Two ranging modes (auto or manual) offer a range of operator control when taking readings. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The meter has a 4,000-count resolution, meaning it can display up to 3,999 units (3-3/4 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for category II installations up to 1,000V (which covers large household appliances and devices connected to a fixed power supply, such as refrigerators and air conditioners), and category III installations up to 600V (which covers items used with enclosed building circuit installations, such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply). The meter comes with a magnetic strap that can be used to hang the meter on metal doors or fixtures.

Specifications

Maximum alternating current (AC) input10 amp
Maximum direct current (DC) input10 amp
Maximum AC voltage input750 volts (V)
Maximum DC voltage input1,000V
Maximum resistance detected40 megaohms
Maximum capacitance detected4,000 microfarads
Maximum frequency detected1 megahertz (MHz)
Temperature measurement range-4 to 1,832 degrees Fahrenheit (F), -us.html to 1,000 degrees Celsius (C)
Duty cycle measurement range0 to 90%
Power supply9V NEDA 1604, JIS 006P, or IEC 6F22 battery (one, installed)
Fuse0.315 amp/1,000V fast-blow ceramic fuse (one, installed), 10 amp/1,000V fast-blow ceramic fuse (one, installed)
Standards metEuropean Conformity (CE); International Electrotechnical Commission (IEC) and European Normal (EN) safety standard 61010-1; Underwriters Laboratories (UL)
Weight0.88 lb./400 g
Meter dimensions7.7 x 3.5 x 2.3 inches /196 × 92 × 60 mm (H x W x D)

H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.

Multimeters are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multimeters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multimeters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages. Safety ratings are based on the International Electrotechnical Commission's (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.

Amprobe manufactures electrical testing equipment for commercial, industrial, and home use. The company was founded in 1948 and is headquartered in Everett, WA.

What’s in the Box?

  • Amprobe 34XR-A TRMS digital multimeter
  • (1) Set test leads
  • (2) Alligator clips
  • (1) Type-K thermocouple probe
  • (1) Temperature probe adaptor plug
  • (1) 9V battery (installed)
  • (2) 0.315 amp/1,000V fast-blow ceramic fuse (1 installed, 1 spare)
  • (1) 10 amp/1,000V fast-blow ceramic fuse (installed)
  • Magnetic strap holster
  • Instructions

  • Rank: #13533 in BISS
  • Brand: Amprobe
  • Model: 34XR-A
  • Number of items: 1
  • Dimensions: 2.00 pounds
  • Frequency to 40 MHz, Temperature to 1832 F, Capacitance to 4000 microF
  • Input warning tone when Test Leads are in the wrong jack
  • 1000V/750V DC/AC
  • 10 Amps AC/DC, fully safety fused
  • Resistance to 40Mohm.

Description #1 by eBay - testequipmentdepot:

Amprobe 3 4XR-A True RMS Digital Multimeter with Temperature and Backlight New - Registered Distributor - Factory Warranty Frequency to 40 MHz, Temperature to 1832 F, Capacitance to 4000 aeF Input warning tone when Test Leads are in the wrong jack 1000V/750V DC/AC 10 Amps AC/DC, fully safety fused Resistance to 40M? Continuity beeper Min/Max, data hold and range lock Auto power off to save battery life Separate door for easy battery and fuse access Magne-Grip Holster with magnetic hanging

Description #2 by eBay:

Amprobe 34XR-A Prof DMM True RMS with Temperature & Backlight Features Frequency to 40 MHz, Temperature to 1832 F, Capacitance to 4000 microF 1000V/750V DC/AC 10 Amps AC/DC, fully safety fused Resistance to 40Mohm. Details Brand: Amprobe Item Dimensions Weight: 2.00 pounds Manufacturer: Amprobe Model: 34XR-A Number of items: 1 Package quantity: 1 Part number: 2727795 Publisher: Amprobe

Description #3 by Tequipment.NET:

PROF DMM TRUE RMS W TEMPERATURE & BACKLIGHT

Amprobe 38XR-A Prof DMM True RMS with Optical PC Interface

Amprobe 38XRA
Amprobe 38XR-A Prof DMM True RMS with Optical PC Interface
by Amprobe
5.0 out of 5 stars(1)

New!: $185.95 $158.88 (as of 03/26/2013 20:32 PST)
3 Used! | New! from $158.88 (as of 03/26/2013 20:32 PST)

Temperature Sensors

The Amprobe 38XR-A is a true rms auto-ranging handheld digital multimeter for engineers designing and troubleshooting industrial automation and control systems. It can measure and test the following: DC and AC voltage; DC and AC current; resistance; frequency; duty-cycle; temperature; capacitance; diodes; continuity; dBm and 4-us.html mA loop current. The 38XR-A includes: one set of test leads with alligator clips, a user manual, a Magne-Grip Holster, a clip, magnet and strap, a temperature adapter, a K-Type Thermocouple, a 9 volt battery (installed) and a spare mA fuse 0.5A/100V. The 38XR-A TRMS digital multimeter has a port for connecting the meter to a computer (software and cable not included). The meter comes with a K-type thermocouple probe for measuring temperature. The maximum or minimum reading mode displays the highest or lowest reading in a session to track a sudden increase or decrease in readings, and the average function displays the average of the recorded maximum or minimum values. The peak + or - function records peak positive or negative values for AC current and AC voltage. The display is backlit for visibility in low light. An audible continuity sensor confirms that the circuit conducts electricity, and a diode test detects whether the circuit's diodes work properly. The hold function keeps a reading on the display, even after the meter is disconnected. An auto power-off mode turns off the unit after 30 minutes of non-use to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. Amprobe began life in Long Island, NY in the late 1940's under the name Pyramid Instrument Company. In 1960 the company name was formally changed to Amprobe Instrument Corporation. Amprobe continued to design, engineer, manufacture and distribute product from its Lynbrook, NY location until it was merged to form ATP and relocated to South Florida in late 1999.

  • Rank: #32323 in BISS
  • Brand: Amprobe
  • Model: 38XR-A
  • Number of items: 1
  • Dimensions: 3.00 pounds
  • Frequency To 10 MHz, Capacitance To 400 microF, Temperature To 2372 F
  • Duty Cycle, dBm and 4 To 20 mA Loop Current Test
  • 1000V/750V DC/AC True RMS, AC + DC Input
  • 10 Amps AC/DC, Fully Safety Fused
  • Resistance To 40Mohm

Description #1 by Tri-Tek Electronics:

PROF DMM TRUE RMS W OPTICAL PC INTERFACE MPN#38XR-A#

Description #2 by Mitchell Instrument Company:

Use code FRG10JFAP for 10% discount off all Fluke or Amprobe Items

Description #3 by Tequipment.NET:

PROF DMM TRUE RMS W OPTICAL PC INTERFACE